Quilt Calc Hubyardage tools

How Many Fat Quarters for a Cal King Quilt?

A California king quilt measures 102" × 100", and those two numbers share no factor above 2. Every grid you lay on that top ends on a fraction of an inch. The shopping answer is 38 to 61 fat quarters, with 45 the figure to write down for the usual 5-inch square.

The Grid a 102 by 100 Top Allows

Draw the grid before counting pieces. Columns and rows round down, because a patch hanging past the edge is not a patch. At 5-inch finished squares, 102 ÷ 5 = 20.4 becomes 20 columns, and 20 rows fill 100 inches exactly. The top lands at 100" × 100", two inches narrow, one inch per side.

Only 3-inch and 6-inch squares divide 102 cleanly, at 34 and 17 columns. Neither divides 100: the 3-inch grid leaves 1 inch over, the 6-inch grid leaves 4.

Fat Quarters by Patch Size

One fat quarter gives 18" × 21" of usable cloth, or 378 square inches. Divide by the cut size, round down, multiply, then divide the patch count by that yield.

Finished patchCut sizeGridPatchesPer fat quarterFat quartersFinished top
2.5"3"40 × 401,6004239100" × 100"
3"3.5"34 × 331,1223038102" × 99"
4"4.5"25 × 256251640100" × 100"
4.5"5"22 × 22484124199" × 99"
5"5.5"20 × 20400945100" × 100"
6"6.5"17 × 16272646102" × 96"
9"9.5"11 × 1112126199" × 99"

Three rows carry the story. The 3-inch grid is leanest at 38 fat quarters and asks for just a 1-inch strip along the foot, because 34 columns fill 102 exactly. The 5-inch grid needs 45 and an inch of border on each side. The 9-inch grid needs 61, half again as many, since one fat quarter gives only two 9.5-inch squares.

Why the 40-Piece Bundle Stops Here

A 40-piece bundle is the usual stand-in for one quilt's worth of cloth. At 5-inch squares a fat quarter yields 9, so 40 pieces hold 360 squares against the 400 the grid wants. Forty short, and no border recovers a missing square.

BundleSquares at 5"Against 400Result
10 pieces90400310 short
20 pieces180400220 short
30 pieces270400130 short
40 pieces36040040 short
50 pieces45040050 spare

Buy 50: five 10-packs, or two 20-packs plus a 10. The spare squares cover a scrappy binding. A full quilt needs 32 at 5 inches and a square king needs 54 at 6, which is why the 40-count box feels sufficient right up to this bed.

Fat Quarters Against the Bolt

Forty-five fat quarters is 11.25 yards of cloth, four pieces to the yard. Cutting the same 400 squares from the bolt takes 58 strips at 5.5 inches, or 8.875 yards, and 60 strips if you round the column count up to 21 and trim. Call the bundle tax 27 percent. At 3-inch squares it nearly disappears: 38 pieces convert to 9.5 yards, and the bolt route takes 9.25.

The Layers Fat Quarters Cannot Cover

No layer of a bed quilt comes out of a bundle. Backing and batting both cut at 110" × 108" for this top. On 42-inch cotton the back takes three panels, 9 yards; on 108-inch wide backing, 3.25 yards rotated so the 108 runs with the length. Batting comes off a 120-inch roll, three yards. Binding runs 404 inches around plus 24 to spare, so 11 strips at 2.5 inches and seven eighths of a yard.

Frequently Asked Questions

How many fat quarters do I need for a cal king quilt?

Thirty-eight to 61 for the top, depending on patch size. A 3-inch grid laid 34 by 33 takes 38 fat quarters, the 5-inch grid takes 45, and 9-inch blocks take 61. Plan on 45 for a 102 by 100 quilt at 5-inch squares.

Is a 40 fat quarter bundle enough for a California king?

No, not at 5-inch squares. Forty pieces give 360 squares against the 400 a 20 by 20 grid needs, so you finish 40 short. Buy 50 instead, which yields 450 squares and leaves five spare for a scrappy binding.

How much fabric is 45 fat quarters?

Eleven and a quarter yards, since four fat quarters make one yard. The same 400 squares cut from the bolt take 58 strips at 5.5 inches, or 8.875 yards, so the precut route costs about 27 percent more cloth than yardage.

Can fat quarters cover a cal king backing or batting?

No. Backing and batting both cut at 110 by 108 inches, and one fat quarter holds 378 square inches, so the back alone would take 32 pieces before seams. Buy 9 yards of 42-inch cotton for a three-panel back, 3.25 yards of 108-inch wide backing, and three yards off a 120-inch batting roll.

Cutting & measuring

Tools that make fabric math easier

As an Amazon Associate, Quilt Calc Hub earns from qualifying purchases at no extra cost to you. These links are affiliate links. We only recommend tools we would use ourselves. Prices and availability are always shown by Amazon at the time of viewing.

Acrylic quilting ruler

Essential for accurate fabric cutting. Look for non-slip and clear grid lines.

View on Amazon

Rotary cutter (45mm)

Fast, clean cuts through multiple layers. Replace the blade when it skips threads.

View on Amazon

Self-healing cutting mat

Protects your work surface. Get the largest size your space allows.

View on Amazon

Pre-cut fabric bundle

Coordinated fat quarters or jelly rolls, ready to piece straight out of the pack.

View on Amazon

Fabric marking pen

Water-soluble or heat-erasable options. Test on a scrap first.

View on Amazon

Flat-head quilting pins

For pinning layers before basting. Extra-long pins help with thick sandwiches.

View on Amazon